双钩作业 · 更新日志
Dual Hook · Update notes
当前版本 / Current version: v
本页在新标签打开，原游戏可继续。
This page opens in a new tab. Your original game remains open.
打开游戏 / Open game
v0.4.1 · 2026-11-03
- 场景版门框饰边沿真实墙体裁剪，斜窄口不再被整条装饰遮住。
v0.4.0 · 2026-11-02
- 默认港口作业场改为暖黄吊架与青灰空间；钢材轮廓、挂点、绳和重心分层画在场地上。
- 偏斜与接触画在构件上；接触环落在模拟给出的真实碰点，不吸到最近角。落位槽幽灵框只标目标，不代替物理。
- 横屏仍以场地为主。竖屏目标与失败原因用屏幕像素字，不随场地缩小；场景占满控件上方可用区，工件与吊点放大看清。下方左右仍是连续双绳触区，抬手即停。
- 经典画面保留。无已存偏好时默认场景；切换画面不重置进度。
v0.3.0 · 2026-11-02
- 新增独立作业「偏心梯形件」：轮廓四点与右偏重心同时用于碰撞和画面，不是只改外形。
- 入门矩形件仍是默认；切换作业会松开按住并重开当局，成绩按作业分开记。
- 预览和现场能看到真实不对称外沿、重心和四个挂点，不替你选挂法。
v0.2.0 · 2026-11-02
- 默认使用吊装作业场景，可随时切换经典画面；切换保留当前吊装进度。
- 按住才移动，松开或失去焦点会取消持续操作，操作反馈与当前状态对应。
- 可比较不同吊点组合的时间、擦碰与支撑代价。
v0.4.1 · 2026-11-03
- Scene door trim follows the solid wall geometry, leaving the sloped opening visible.
v0.4.0 · 2026-11-02
- The default worksite uses a warm-yellow hoist over a blue-gray bay, with steel outlines, hang points, ropes and center of mass layered on the field.
- Tilt and contact draw on the workpiece. The contact ring sits on the simulated hit, not the nearest corner. The slot ghost marks the target only and does not replace physics.
- Landscape stays field-first. Portrait uses screen-pixel type for the goal and failure reasons, fills the band above the pads with a larger bay so the workpiece and hang points stay readable, and keeps continuous left/right rope pads; release stops motion.
- Classic view remains. Scene is the default with no saved preference. Switching views keeps progress.
v0.3.0 · 2026-11-02
- New independent job: an offset trapezoid whose four vertices and right-biased center of mass drive both collision and drawing.
- The introductory rectangle remains the default. Switching jobs releases holds, resets the current run, and keeps records per job.
- The preview and playfield show the real asymmetric outline, center of mass, and hang points. No hang pair is preselected.
v0.2.0 · 2026-11-02
- The lifting scene is now the default view. Switch to the classic view while keeping your current lifting progress.
- Movement requires holding a control. Releasing it or losing focus cancels the held action, keeping feedback aligned with the current state.
- Compare lifting-point combinations using time, contact and support costs.